ZMAX V5 Flat Top
SIGELEI Zmax V5 is a variable Voltage/Wattage mod that can be used with either one 18350, one 18500, one 18650 or two 18350 batteries.
It can deliver 3.0 to 6.0 Volts or 3.0 to 15.0 Watts. Equip the main body with a USB adapter, Zmax V5 can charge a mobile phone.
-Material: 304 stainless steel
-Thread: 510 and ego thread
-Battery: 18350, 18500, 18650
-Charge mobile phone
-3.0 to 6.0 Volt variable voltage (VV)
-3.0 to 15.0 Watt variable voltage (VW)
-Smoking time check
-Output voltage display
Operation of Zmax V5
-Press 5 times continuously to turn on the mod and take out the battery to turn off the device.
-Press 3 times to browse the menu when the screen has shut down.
-Choose the menu and wait 2 seconds to enter it; then set the item and wait for 2 seconds to save your setting.
-If there is no operation in 2 seconds, you will exit the menu automatically.
The menu has 9 different functions:
1. OUT ON/OFF
Disabling the button
The device can be disabled to prevent from unwanted firing by selecting ‘OUT OFF’. When ‘OUT ON’ is selected then the device will work normally and atomizer will fire.
2. VOLTAGE UP
To increase the Voltage from 3.0V to 6.0V in 0.1 Volt increments, or power from 3.0W to 15.0W in 0.5 Watt increments.
*Select Voltage or Wattage setting in menu 7.
3. VOLTAGE DOWN
To reduce the Voltage from 6.0V to 3.0V in 0.1 Volt decrements, or power from 15.0W to 3.0W in 0.5 Watt decrements.
* Select Voltage or Wattage setting in menu 7.
4. BATTER VOLTAGE
Battery level indicator
To check the battery voltage. A fully charged battery will have 4.2V. We recommend charging the battery when it falls to 3.3V. Zmax will switch off automatically when the battery level reaches 3.1V.
5. LCD DISPLAY
Information to display
To select what the display shows you while the button is pressed:
Voltage: to display the output voltage
Time: to display the time of each puff
Resistance: to display the resistance of atomizer
Current: to display the working current
6. LCD ON/OFF
Switch LCD on/off
When ‘ON’ is selected, the LCD will display your settings when the button is pressed. When ‘OFF’ is selected, the LCD will not display your settings when the button is pressed.
7. POWER VOLTAGE
Select VV or VW
To choose between variable voltage and variable wattage.
Select RMS or MEAN voltage.
9. Mobile Power
To charge the mobile phone
Connect the mobile phone with the ZMAX V5 with a USB charger. Choose ‘Mobile OUT ON’, press for 10 seconds and it will charge the mobile In this period, the LCD will show ‘Warning!’ and ‘No smoking’.
To stop charging, press for another 10 seconds and separate the mobile and ZMAX V5.
Please make sure you have set Mobile Out OFF after charging. Only in this mode can you smoke.
*Only when using one battery can you charge the phone.
1. Clean the thread after using in case of rusting and corrosion.
2. Do not reverse the battery in the tube.
3. Turn off ZMAX when not using.
4. Do not use the protected batteries.
5. Had better not put Zmax in your pocket. A hanger is recommended.
Error-code: Short=short circuit of the atomizer
Low-V= under voltage
HHH= over voltage
*When the resistance of the atomizer is below 1.2Ω, the Zmax will not work.
Warranty and Guarantee:
Improper operation will void the warranty.
Do not drop Zmax
Electronic cigarette are not suitable for the juvenile, the non-smoking, people with nicotine allergy, people with allergy to propylene glycol, pregnant women and people with cardiovascular disease.
6.Take out the battery to turn off the device completely.